Device Operation

Howto guides for SmartDash

Quick start guide
This post relates to configuring the Smart Dash when you get it from Situne ! Prerequisites Smart Dash Kit from Situne iOS based device Smart Dash a...
Tue, 4 May, 2021 at 2:52 PM
Upgrading DAH-280 Sensor Hub Firmware
Introduction Situne are continuously adding features in the DAH-280 Sensor Hub, this means that you will need to upgrade the firmware on the SensorHub from...
Sun, 16 Feb, 2020 at 12:18 AM
Smart Dash App CAN-Bus Setup
In this post we will go in depth on setting up the DAH-280's CAN-Bus from the Smart Dash iOS App. Prerequisites: DAH-280 connected to +12V an...
Mon, 17 Feb, 2020 at 3:03 PM
Smart Dash Link G4+ ECUs CAN configuration
This guide describes how to setup a Smart Dash system with the Link G4+ Series of ECU's Prerequisites Smart Dash DAH-280 connected to power and C...
Wed, 19 Feb, 2020 at 4:13 PM
Add new DAH-280 to Smart Dash
Abstract This article describes how to add and setup a Situne Data Acquisition Hub (DAH-280) to you Smart Dash Application. Prerequisites You need to ...
Tue, 4 May, 2021 at 10:55 PM
Smart Dash Channel Configuration
Abstract This article will show you how to add channels to you Smart Dash configuration. Channels are the element that connects the data collected by Situn...
Wed, 5 May, 2021 at 1:05 AM